Hardware für dein Meerwasseraquarium

Pressure hose 6 x 4 mm white 1/4 inch

post-filter for osmosis system housing,connectors (1/4" ( 6 mm ) x 1/4" thread),wall bracket, double bracket 2" X 2"1 Ltr Resin Filling Quantity 300-400 ml

post filter for osmosis system housing, connections (1/4" ( 6 mm ) x 1/4" thread), wall bracket, 1 Ltr resin capacity 700-800 ml.

Powerful and chemical-free - the ARKA Aquatics myAqua1900 reverse osmosis system uses the power of water pressure and filters up to 99 percent of salts, bacteria and pollutants such as nitrite or phosphate and heavy metals from conventional tap water. The ratio of osmosis water to residual water is just 1:1-1.5. Thus effectively treated, the water becomes a safe feel-good ambience even for marine and freshwater inhabitants.The system does not require any chemical additives - it works via water pressure and natural filter materials, without chemical additives. Which makes the retention rate very high.   Filter performance: up to 1900 liters / day   Osmosis water to residual water: yield approx. 1:1-1.5    Operating pressure: 1 to 4 bar   Temperature: 5 to 38 degrees   Salt retention capacity: 98% - 99%The system components carbon and fine filter (cartridge) as well as the membrane filter are subject to the following replacement intervals:   Membrane filter: 12 - 24 months from commissioning    Fine filter: 6 - 12 months from commissioning   Carbon filter C1: 6 - 12 months from commissioning   Carbon filter C2: 6 - 12 months from commissioningTip: Filters are consumables and must be replaced regularly! So that their pets always enjoy consistently high water quality, stockpiling is recommended. All three system components (carbon, fine and membrane filters) are available separately.Note: The following accessories are included in the scope of delivery:Water tap, 150 cm hose, 300 cm hose, T-piece including valve, wall mounting,TDS meter, wastewater clamp, water connection (3/4"-1/4"),shut-off valve (1/4"-1/4").

Why RO Water? Pipe water. is usually contaminated with various pollutants, which, depending on its quality can have negative effects on the aquarium. For example, it can cause Algae and diatom blooms favor, which then must be fought with chemical Methods must be fought.Reverse osmosis water is essentially free of chlorine, nitrates, phosphates and heavy metals, and is an ideal basis for the production of saline solutions saline solutions, but also for freshwater aquariums or as a substitute for Evaporation losses.The D-D reverse osmosis plant works according to a three-stage system:1. A 10" 5 micron pre-filter that removes sediment and particles from the water to protect the membrane from clogging and extend its life. prolong its life. The pre-filter is housed in a membrane so you can monitor the life of the disposable element. monitor the life of the disposable element. We recommend that you replace this filter element at a maximum interval of 6 months to change.2. A 10" block carbon filter with 10 microns. This carbon filter removes the chlorine from the water. This element should also be be changed. 3. The. RO membrane and housing. In this phase is the membrane itself. All D-D membranes are high quality thin film membranes.All D-D reverse osmosis systems come complete with the following accessories:- Flow limiter with integrated valve- adapter for tap connection- tap connection with thread- 2 m 1/4" RO hose in white, blue and orange- Sewage line return valve- Filter key- Complete Guidedimensionsheight:  39 cmdepth:  13 cmwidth:  35 cm

Die Kamoer FX-STP Präzisions-Schrittmotorpumpe wurde speziell für den Dauereinsatz in Aquarien entwickelt und eignet sich optimal für eine Vielzahl von Anwendungen.Funktionen:- geeignet für den Dauerbetrieb- hohe Präzision mit Schrittmotortreiber- einstellbare Flussrateneinstellung von 0 - 120 ml / min- Kalibrierung der Flussrate- Batterie-Backup (Benutzereinstellung werden gespeichert, wenn die Stromversorgung unterbrochen wird)- hochwertige, langlebige PharMed®-Schläuche im Pumpenkopf- leicht austauschbares AC / DC-Netzteil- außergewöhnlich zuverlässigAbmessungen: 125mm (h) x 83mm (w) x 133mm (d)

Abyzz A100 - Adjustable high performance pumpThe compact Abyzz A100 pump is in no way inferior to the larger Abyzz pumps in the choice of materials used. It consists of programmable, powerful menu-controlled electronics (driver) and a sine-commutated synchronous motor (pump).Operation with extra-low voltage (12V) enables safest use in all applications. The integrated bearing flushing provides optimum protection against calcification and, in conjunction with the silicon carbide bearings used, a titanium rotor and a special carbide shaft, ensures low-maintenance operation.The processed materials are designed for long service life and meet the highest requirements and quality standards. The product is developed and produced in Germany by venotec: "Made in Germany".Special features    Adjustable speed range (0...100%)   Programmable control (e.g. shaft and random mode)   Extensive protective functions against e.g.. Dry running, overtemperature and overcurrent   Soft start   Bus-capable interface for peripheral devices   Lockable plug contacts    Low noise operation   Motor operating voltage 12V   Rotatable motor baseApplications   Freshwater and marine aquariums    Pond filtration systems   BrooksScope of supply   Abyzz A100 pump and driver    Mains lead (1.5m) and connecting lead   Instruction manualSet up either submerged or dry in piping, not self-priming.Inlet/outlet connections are suitable for PVC/ABS adhesive fittings. Additional Information weight 5 kg size 340 × 250 × 140 mm conveyor performance maximum. 8,500 l/h Conveyor performance nominal. 7,300 l/h Promotional height maximum. 6.0 m Maximum operating pressure. 1.2 bar Maximum diving depth. 2.0 m Connections-Inlet/Outlet. 40 mm / 25 mm Pipe length pump. 3.0 m take-up_performance. 5 ... 100 W operating voltage 90 ... 240 V~, 50 ... 60 Hz ambient temperature +2°C ... +40°C datasheetAbyzz A100_datasheet (PDF)

The Abyzz A200 pump with titanium rotor consists of programmable, powerful menu-controlled electronics (driver) and a sine-commutated synchronous motor (pump).The high efficiency of the motor, in conjunction with the speed adjustable to your power requirements, makes the pump an energy-saving solution. The integrated bearing flushing provides optimum protection against calcification and, in conjunction with the silicon carbide bearings used and a special carbide shaft, ensures low-maintenance operation.The processed materials are designed for long service life and meet the highest requirements and quality standards. The product is developed and produced in Germany by venotec: "Made in Germany".Special features    Adjustable speed range (0 ... 100%)   Programmable control (e.g. shaft and random mode)   Extensive protection functions against e.g. Dry running, overtemperature and overcurrent   Soft start   Bus-capable interface for peripheral devices   Lockable plug-in contacts    Low-noise operationApplications   Freshwater and marine aquaristics    Pond filter systems    BrooksScope of supply    Abyzz A200 pump and driver   Mains cable (1.5 m) and connecting cable    Instruction manualPositioning optionally submerged or dry in piping, not self-priming.Inlet/outlet connections are suitable for PVC/ABS adhesive fittings. Additional Information weight 5 kg size 340 × 250 × 140 mm conveyor performance maximum. 17,000 l/h Conveyor performance nominal. 14,500 l/h Promotional height maximum. 8.8 m Maximum operating pressure. 1.2 bar Maximum diving depth. 2.0 m Connections-Inlet/Outlet. 50 mm / 40 mm Pipe length pump. 10.0 m, 3.0 m take-up_performance. 5 ... 200 W operating voltage 230 V~, 50...60 Hz ambient temperature +2°C ... +40°C Line length. 3.0 m,

The Abyzz A400 pump with titanium rotor consists of programmable, powerful menu-controlled electronics (driver) and a sine-commutated synchronous motor (pump).The high efficiency of the motor, in conjunction with the speed adjustable to your power requirements, makes the pump an energy-saving solution. The integrated bearing flushing provides optimum protection against calcification and, in conjunction with the silicon carbide bearings used and a special carbide shaft, ensures low-maintenance operation.The processed materials are designed for long service life and meet the highest requirements and quality standards. The product is developed and produced in Germany by venotec: "Made in Germany".Special features    Adjustable speed range (0 ... 100%)   Programmable control (e.g. shaft and random mode)   Extensive protection functions against e.g. Dry running, overtemperature and overcurrent   Soft start   Bus-capable interface for peripheral devices   Lockable plug-in contacts    Low-noise operationApplications   Freshwater and marine aquaristics    Pond filter systems    StreamsScope of supply    Abyzz A400 pump and driver   Mains lead (1.5 m) and connecting lead    Instruction manualPositioning either submerged or dry in piping, not self-priming.The inlet/outlet connections are suitable for PVC/ABS adhesive fittings. Additional Information weight 5 kg size 420 × 290 × 134 mm conveyor performance maximum. 23,500 l/h Conveyor performance nominal. 18,600 l/h Promotional height maximum. 12.5 m Abstream speed maximum. 7.5 m/s Absorption speed nominal. 6.4 m/s Maximum operating pressure. 1.2 bar Maximum diving depth. 2.0 m Connections-Inlet/Outlet. 50 mm / 40 mm Pipe length pump. 10.0 m, 3.0 m take-up_performance. 4 ... 400W operating voltage 230 V~, 50...60 Hz ambient temperature +2°C ... +40°C Line length. 3.0 m, Data-sheetAbyzz A400_Data-sheet (PDF)

The small but fine flow pump with a lot of power and brains Let not be fooled by its compact appearance! The submersible AquaIllumination submersible wave pump delivers 11,200 liters per hour. So your pool stays clean and your corals healthy. Easy built-in controlThe Nero uses Bluetooth LE and the MyAI app to connect in connection to any iOS or Android device in seconds. device. This allows you to easily set up and program one or more Nero pumps. set up and program. No smartphone? No problem!The Nero has a built-in controller for easy, standalone speed adjustments. 3 pump modesEasily drag and drop pump modes onto your timeline. Constant Speed: A constant flow with the intensity you choosePulse: Consists of evenly high and low levelsRandom: Simulates a high-energy reef environment Simultaneous control together with AI LED lights is possible.TECHNICAL DATAlength: 5.3 cm (2.1")diameter: 7.11 cm (2.8")max. Glass thickness: 16 mm - NOW NEW max. Flow: 11350 l/h (3000 GPH)power consumption: max. 30 watts