ARKA® Core Bio-Pellet ReactorThe ARKA® Core BP500 is a specially designed bio-pellet reactor for any marine or freshwater aquarium. The ARKA® Bio-Pellet Reactor "BP500" is suitable for all common bio-pellets and filter media, such as activated carbon, phosphate or silicate adsorbers, and supports a permanent and effective reduction of nitrate and phosphate.Thanks to the unique design and the resulting constant turbulence succeeds an optimal flow of the bio-pellets. This sustainably prevents clumping and ensures maximum effectiveness. Suitable for up to 500 ml bio-pellets / filter media.What makes the ARKA® Core Bio-Pellet Reactor "BP500" so special? Extremely compact & Easy to maintain Quality pump from Sicce - Made in Italy Efficient, durable and reliable Easy to use Quiet running and low power consumption Article | Dimensions | Recommended aquarium size | Power consumptionCREACTOR| ~ 18 × 10 × 28.5 cm | up to 2000 l | 8 W
Bubble Magus BP 100 Bio Pellet Reactor for operation insidethe filter basin.Fill volume: 1.5 lFloor area: 146mm x 179mmHeight: 450mmPump: Rock WP 600/11 WattDelivery without Bio Pellets.
Bubble Magus BP 100 - Biopellet Filter,
for operation inside the filter basin.
Filling capacity: 1.5 l,
Footprint: 146 mm x 179 mm, height: 450 mm,
Pump: Rock WP 600/11 watts.
Delivery without bio pellets.
MULTIFILTER WITH CONTROLLER PUMPPellet reactor / fluidized bed filter for various filter media.The Fauna Marin Multifilter is versatile and can be used in a small space with the following filter media: Fauna Marin Carb L activated carbon Fauna Marin NPO Redupellets Fauna Marin Phosphate Adsorbers: Power Phos, Phos 0.04 or Ultra Phos combinations with Carb L activated carbon and phosphate adsorbers are also possibleThe Fauna Marin Multifilter can be used as a pellet reactor, as a fluidized bed filter or as a simple filterDimensions Multifilter 1.5 liters: Footprint: 24 x 14 cm Height: 35 cm Capacity: approx. 1.5 liters incl. controllable pump Instructions for use: Position the filter in the technical pool (filter sump) and connect the enclosed pump (Sicce 1.0) with the screw fitting. The water level should not exceed 25-30cm. It is important that the multifilter stands straight. Make sure that the feed pump delivers its full power (see operating instructions, enclosed with the pump). If possible, install the filter before a skimmer, this way you will achieve a particularly fast nutrient removal. Remove the top center screw and the installed strainer and fill prepared filter material into the filter Then install the strainer again in reverse order and tighten the screw only weakly. Now turn on the pump and make sure that the filter material moves. Make sure the filter never stalls and the pump always provides adequate water flow Weekly Work: Cleaning the top screen Cleaning the drain holes Cleaning the outside side walls of the filter 1000 ml of Skim Breeze per 500 liters, for 4 - 6 weeks Every 2 weeks: Clean feed pump every 3-4 weeks: Remove and clean the bottom screen It is very important that the returning water drains down the side walls of the filter. Proper recirculation will re-oxygenate the water that has been depleted during nutrient breakdown. Using the flow control on the suction side of the pump, you can precisely adjust the flow rate to ensure quiet operation of the filter..
MULTIFILTER WITH CONTROLLER PUMPPellet reactor / fluidized bed filter for various filter media.The Fauna Marin Multifilter is versatile and can be used in a small space with the following filter media: Fauna Marin Carb L activated carbon Fauna Marin NPO Redupellets Fauna Marin Phosphate Adsorbers: Power Phos, Phos 0.04 or Ultra Phos combinations with Carb L activated carbon and phosphate adsorbers are also possibleThe Fauna Marin Multifilter can be used as a pellet reactor, as a fluidized bed filter or as a simple filterTechnical details:Fauna Marin Multifilter 3,0 L: Footprint: 24 x 14 cm Height: 50 cm Capacity: Approx 3.0 L Includes controllable pump Operating instructions: Position the filter in the technical pool (filter sump) and connect the enclosed pump (Sicce 1.0) with the screw fitting. The water level should not exceed 25-30cm. It is important that the multifilter stands straight. Make sure that the feed pump delivers its full power (see operating instructions, enclosed with the pump). If possible, install the filter in front of a skimmer, so you achieve a particularly fast nutrient removal. Remove the top center screw and the installed strainer and fill prepared filter material into the filter Then install the strainer again in reverse order and tighten the screw only weakly. Now turn on the pump and make sure that the filter material moves. Make sure the filter never stalls and the pump always provides adequate water flow Weekly Work: Cleaning the top screen Cleaning the drain holes Cleaning the outside side walls of the filter 1000 ml of Skim Breeze per 500 liters, for 4 - 6 weeks Every 2 weeks: Clean feed pump every 3-4 weeks: Remove and clean the bottom screen It is very important that the returning water drains down the side walls of the filter. Proper recirculation will re-oxygenate the water that has been depleted during nutrient breakdown. Using the flow control on the suction side of the pump, you can precisely adjust the flow rate to ensure quiet operation of the filter..
BPR-100 internal - Biopelletreactor for filter sump.
Biopelletreactor BPR-100 internal
Filter only for operation in the filter sump.
For aquariums up to 600 l.
Size 130 x 130 x 430 mm
Minimum water level 13cm
Max. Filling quantity approx. 1200ml BioPellets
Included in delivery:
- Incl. EHEIM Compact 1000 / 15 W
- 500 ml NP-Minus BioPellets
Shipping weight:
3.50 Kg
Article weight:
3.00 Kg
BPR-150 - BioPellet Reactor - Filter for external operation or in the filter sump.BPR-150 for aquariums up to 2000 l.Size 200 x 220 x 480 mmHose connections 22mmVolume 5100mlMax. Filling quantity approx 3000ml BioPelletsWorking Biopellets:The highly effective NP-Minus BioPellets consist of 100% biodegradable polymers. These dissolve over a period of several months and act as a carbon source for aerobic bacteria and other microorganisms.The pellets provide a food source for these microorganisms. Together with the nitrate and phosphate present in the aquarium water by metabolic processes mostly in excess, thus microbial biomass is formed..
Biopelletreactor BPR-150 internalFilter only for operation in the filter sump.For aquariums up to 1500 l.Size 165 x 165 x 550mmMinimum water level 13cmMax. Filling amount approx. 3000ml BioPelletsIncluded in delivery:- Incl. EHEIM CompactON 2100 / 38 W- 1000 ml NP-Minus BioPelletsWorking Biopellets:The highly effective NP-Minus BioPellets consist of 100% biodegradable polymers. These dissolve over a period of several months and act as a carbon source for aerobic bacteria and other microorganisms.The pellets provide a food source for these microorganisms. Together with the nitrate and phosphate present in the aquarium water by metabolic processes mostly in excess, thus microbial biomass is formed..
BPR-200 - BioPellet Reactor - Filter for external operation or in the filter sump.BPR-200 for aquariums up to 3000 l.Size 230 x 230 x 480 mmHose connections 16 / 22mmVolume 8000mlMax. Filling amount approx 5000ml BioPelletsWorking Biopellets:The highly effective NP-Minus BioPellets consist of 100% biodegradable polymers. These dissolve over a period of several months and act as a carbon source for aerobic bacteria and other microorganisms.The pellets provide a food source for these microorganisms. Together with the nitrate and phosphate present in the aquarium water by metabolic processes mostly in excess, thus microbial biomass is formed..
BPR-80 internal - Biopelletreactor for filter sump.
Biopelletreactor BPR-80 internal
Filter only for operation in the filter sump.
For aquariums up to 400 l.
Size 110 x 110 x 390 mm
Minimum water level 13cm
Max. Filling quantity approx. 600ml BioPellets
Included in delivery:
- Incl. EHEIM Compact 600 / 7 W- incl. 250 ml BioPellets
Shipping weight:
2.50 Kg
Article weight:
2.00 Kg